Publicité
Les langues disponibles
Les langues disponibles
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
(USA Models Only):
With 6 ohm loads, both channels driven, from 20 Hz – 20 000 Hz; rated
90 watts per channel minimum RMS power in stereo mode, with no more
than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
1) 2)
Rated Power Output at Stereo Mode
(6 ohms, 20 Hz – 20 kHz, THD 0.09%): 90W + 90 W
Reference Power Output at Stereo Mode
(8 ohms, 20 Hz – 20 kHz, THD 0.09%): 70W + 70 W
Reference Power Output
(6 ohms, 1 kHz, THD 0.9%)
FRONT: 110 W + 110 W
CENTER: 110 W
SURROUND: 110 W + 110 W
SURROUND BACK: 110 W + 110 W
Reference Power Output
(8 ohms, 1 kHz, THD 0.9%)
FRONT: 100 W + 100 W
CENTER: 100 W
SURROUND: 100 W + 100 W
SURROUND BACK: 100 W + 100 W
Reference Power Output at Surround Mode
(6 ohms, 1 kHz, THD 0.9%): 140 W per channel
Measured under the following conditions:
1)
Power requirements: 120 V AC, 60 Hz
Depending on the sound field settings and the source, there may be
2)
no sound output.
Reference power output for front, center, surround, surround back
3)
speakers.
30
EN
3)
Frequency response
Analog
10 Hz – 100 kHz, ±3dB (with sound field, equalizer and 360SSM
bypassed)
Input
Analog
Sensitivity: 500 mV/50 kilohms
S/N
: 105 dB (A, 500 mV
)
4)
5)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB (A, 20 kHz LPF)
Output (Analog)
ZONE 3
Voltage: 2 V/1 kilohm
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
±10 dB, 1 dB step
INPUT SHORT (with sound field and equalizer bypassed)
4)
Weighted network, input level
5)
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz (100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
Publicité
