Sony STR-AZ1000ES Mode D'emploi page 17

4
Connect the supplied AC power cord (mains lead) to the AC IN
terminal on the receiver firmly.
* Space remains between the plug and the rear panel even
when the power cord (mains lead) is inserted firmly. The cord is
supposed be connected this way. This is not malfunction.
5
Connect the AC power cord (mains lead) to a wall outlet.
Before connecting the AC power cord (mains lead), be sure to
make connections for speakers and the other devices.
"HELLO" appears on the display panel and then switches to
"PLEASEWAIT."
You cannot turn on the receiver until the "PLEASEWAIT" display
disappears.
HELLO
PLEASEWAIT
To the wall
outlet
AC power cord
(mains lead)
(supplied)
*
AC IN terminal
6
Turn on the TV, and then switch the input of the TV to the
receiver.
7
Press  (power) to turn on the receiver.
17
EN