Publicité
Les langues disponibles
Les langues disponibles
English
nOTE: The state of charge indicator is only an indication
of the charge left on the battery. It does not indicate tool
functionality and is subject to variation based on product
components, temperature and end-user application.
Fig. D
12
Extendable Crevice Tool
1. To extend the crevice tool
, pull it out from the
4
vacuum nozzle
3
until it clicks in place.
2. To collapse the crevice tool
, push it into the vacuum
4
nozzle
3
until it clicks in place.
Attaching Motorized Brush (Fig. G)
CAUTION:
The unit needs to be switched
off when the motorized brushis attached or detached.
nOTE: Do not use directly on pets.
1. Slide the vacuum nozzle
3
into the opening of the
motorized brush
.
10
2. Ensure that the plastic retaining tabs
the recesses
13
. An audible click will be heard.
Fig. E
10
3
13
Removing Motorized Brush
CAUTION:
The unit needs to be switched
off when the motorized brush is attached or detached.
1. Pull the the plastic retaining tabs
12
from the recesses
.
13
2. Pull the vacuum nozzle
3
from the motorized brush
Dry pick up
For everyday spills of dry material.
-
Do not fill the dust bowl
5
beyond the end of
the filter.
4
Optimizing the suction force
In order to keep the suction force optimized, the filters must
be cleared regularly during use.
Emptying and cleaning the product.
Removing the dust bowl and filter (Fig. E, F)
2
WARNING:
should be cleaned regularly.
1. Hold the dust bowl over a trash can before pressing the
dust bowl release button
access door
2. While holding the dust bowl over a trash can, lightly
shake it to empty the dust bowl
3. Lift the prefilter
in figure F.
4. Lift the filter
5. While holding the dust bowl over a trash can, empty the
dust bowl
5
6. Install the filter
the prefilter
7. Close the dust bowl access door
into place.
WARNING:
without the filters. Optimum dust collection will only
be achieved with a clean filter.
Fig. E
12
engage with
12
Fig. F
13
outward, away
10
.
Cleaning the dust bowl and filter
The prefilter
12
soapy water. The dust bowl
dry cloth.
1. Make sure the filter
dust bowl
5
The filter is reusable and
6
to release the dust bowl
as shown in figure E.
11
5
.
12
out of the dust bowl
5
as shown
13
out of the dust bowl
5
.
.
13
into the dust bowl
5
, then install
12
into the dust bowl
5
.
11
until it clicks firmly
Never use the appliance
6
11
7
5
and filter
13
can be washed in warm
5
can be wiped clean with a
13
, prefilter
12
and the
are dry before installing.
Publicité
