batteries may exhibit unpredictable behavior resulting
in fire, explosion or risk of injury.
d ) Do not expose a battery pack or appliance
to fire or excessive temperature. Exposure to
fire or temperature above 266 °F (130 °C) may
cause explosion.
e ) Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
f ) For HHVK320JZ, only use charger S010QU1400040/
SSC-140040US. For HHVK515JZ and HHVK515JP,
only use charger S010QU2300040/SSC-230040US.
SAVE THESE
INSTRUCTIONS
SYMBOLS
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ......................... volts
...................... Class II
W ........................ watts
Hz ....................... hertz
.../min or rpm .. revolutions or
A ......................... amperes
min ..................... minutes
Wh ...................... Watt hours
n o ....................... no load speed
or DC ...... direct current
...................... earthing terminal
or AC ........... alternating current
..................... safety alert symbol
...................... Class I Construction
(grounded)
ASSEMBLY
WARNING:
Do not attempt to modify or
repair the appliance.
Intended use
Your BLACK+DECKER lithium ion cordless vacuum cleaner
has been designed for light, dry vacuum cleaning purposes.
This appliance is intended for household use only.
Charging the Battery
WARNING:
For use only with the supplied
charger.
WARNING:
Before charging, be sure to
empty all contents and dry thoroughly if needed to
avoid damage to your appliance.
1. Before first use, the battery must be charged for at least
6 hours.
2. Make sure the appliance is switched off.
3. Fig. B - Plug the jack plug
9
of the jack plug charger
into the charging port
of the vacuum.
7
4. Plug the charger into any standard 120 Volt 60 Hz
electrical outlet.
Fig. B
nOTE: While charging, the charger may become warm. This
is normal and does not indicate a problem. The appliance
can be left connected to the charger indefinitely.
WARNING:
at ambient temperatures below 39 °F (4 °C) or above
104 °F (40 °C).
Construction
Charging Indicator LED
(double insulated)
1. While charging, the white LEDs on the charger
reciprocation per
flash and increase in sections.
minute
2. When charging is completed, the white LEDs will
turn off.
Switching On (Fig. C)
1. To switch the appliance ON, press the On/Off switch
2. Press the On/Off switch
3. Press the On/Off switch
Fig. C
1
State of charge indicator
This appliance include a state of charge indicator
consists of three white LED lights
level of charge remaining in the battery. This feature is only
activated when the vacuum is powered on.
The state of charge indicator is an indication of approximate
levels of charge remaining in the battery pack according to
the following indicators:
8
The LED battery indicator displays the remaining charge
and warns you when the battery is low. The final LED will
flash continuously when there is only 1 minute of runtime
remaining. All LEDs will flash when the unit is discharged.
English
8
9
7
Do not charge the battery
8
will
.
1
1
again to engage boost mode.
1
switch to turn the vacuum Off.
which
2
11
that indicate the
3