Rittal DK 7030.022 Notice D'installation Et D'utilisation page 19


Select the "Setup" entry and press the "Return" key to confirm
your selection (fig. 5, item 4).

Select the "IP Configuration" entry and press the "Return" key
to confirm your selection. The menu for entering your security
PIN will appear.

Keep pressing the "Up" key (fig. 5, item 2) or the "Down" key
(fig. 5, item 5), until the required digit is displayed in the first po-
sition of the PIN.

Press the "Return" key to move to the second position of the
PIN.

Once again, keep pressing the "Up" key or the "Down" key until
the required digit is displayed in the second position of the PIN.

Move to the third and fourth positions of the PIN and set them
in the same way.
Note:
"1221" is the preset PIN for accessing the configuration menu. This PIN can be modified
via the CMC III PU 19" Edition website.

Make a note of the new PIN number and keep it somewhere safe.

Finally, press the "Return" key (fig. 5, item 8). The DHCP menu

will appear. The "
Rittal CMC III Processing Unit 19" Edition
" symbol marks the current DHCP setting.
Settings
EN
19