Costway TQ10192 Mode D'emploi page 7

Put the gaskets, front wheel, gaskets and nut into the front axle in
turn.
Fix the nut with the M10 wrench and then attach the front wheel cover
to the wheel.
Place the rear wheel, gaskets, and nut on the rear axle in turn.
Fix the nut with the M10 wrench and then attach the rear wheel cover
to the wheel.
Clip the body connection into the body and use M4 * 10mm screw
fixation.
Battery
Power connector
GEAR BOX
12
Fuse box
Gearbox Gearbox
insert insert
GEAR BOX
Gearbox power supply
Turn over the body
1. Find out the main power line under the seat, insert the plug- in of
the power line into the corresponding socket of the receiver, connect
one end of the right drive motor line with the left drive motor line, and
insert the other plug-in on the right into the socket of the receiver.
O
Fix the steering wheel.
• Remove the nut and bolt from the steering wheel.
• Connect the wires coming from the steering column to the wires on
the steering wheel.
• Insert the steering wheel over the steering and secure with nut and
bolt.
M
Fix the seat.
• Merge seat.
• Clip the seat into the body.
• Rotate the latch on the seat to secure the seat.
13