Tile Wet Drilling Machine EFB 125 P
Rated voltage:
Rated power input:
Rated current:
Order number:
Frequency:
Drilling diameter:
Thread connection:
Rated speed:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Subject to technical changes!
Available add-ons:
Item
Diamond drill bits R½" female,
usable length: 40mmØ 22-122mm
Quick-change adapter G½"male / G½" female
Drill rig BST 125V
Centering device with water collection
Water tank 5l
For further information about our products and our wide range of
accessories please see: www.eibenstock.com
Tile Wet Drilling Machine with each SW22 and SW32 open-end wrench and
operating instructions in machine case.
Application for Intended Purpose
The Diamond wet drill EFB 125 P is intended for professional use and may
be used only by instructed personnel.
It may be used either with or without an adequate drill rig.
With the appropriate diamond drill bits the tool may be used for wet drilling of
holes in tiles, stoneware and natural stone.
The diameter of the drill bit should not exceed 122 mm.
Technical Data
Supply
50 / 60 Hz
6 - 125 mm
G ½" male
250-1000 rpm
II
IP 20
about 3,6 kg
EN 55014 and EN 61000
17
230 V ~
1150 W
6,7 A
0312C000
Order No.
38004000
09659000
3583A000
35811000