Makita LS003GZ01 Manuel D'instructions page 19

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole diameter
Max. kerf thickness of the saw blade
Max. miter angle
Max. bevel angle
No load speed (RPM)
Dimensions (L x W x H)
Rated voltage
Net weight
Cutting capacities (H x W)
0°
Thickness of wood
facing on guide
fence for increased
45° (right and left)
Thickness of wood
facing on guide
fence for increased
60° (right and left)
Thickness of wood
facing on guide
fence for increased
Cutting capacities for special cuttings
Type of cutting
Crown molding 45° type
(with crown molding stopper used)
Base board
(with horizontal vise used)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
European countries
Countries other than Europe
European countries
Countries other than Europe
Miter angle
-
20 mm
38 mm
height of cut
-
15 mm
25 mm
height of cut
-
15 mm
25 mm
height of cut
30 mm or 25.4 mm (country specific)
898 mm x 690 mm x 725 mm
45° (left)
61 mm x 382 mm
71 mm x 363 mm
78 mm x 325 mm
80 mm x 292 mm
61 mm x 268 mm
71 mm x 255 mm
-
-
BL4020 / BL4025 / BL4040* / BL4040F* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC / DC40WA
19 ENGLISH
LS003G
305 mm
305 mm
30 mm
3.2 mm
Right 60°, Left 60°
Right 48°, Left 48°
-1
3,600 min
D.C. 36 V - 40 V max
30.5 - 31.7 kg
Bevel angle
0°
92 mm x 382 mm 44 mm x 382 mm
107 mm x 363 mm 54 mm x 363 mm
115 mm x 325 mm 61 mm x 325 mm
120 mm x 292 mm
92 mm x 268 mm 44 mm x 268 mm
107 mm x 255 mm 54 mm x 255 mm
115 mm x 227 mm
120 mm x 212 mm
92 mm x 185 mm
107 mm x 178 mm
115 mm x 155 mm
120 mm x 140 mm
Cutting capacity
203 mm
171 mm
45° (right)
-
-
-