Publicité
Les langues disponibles
Les langues disponibles
Preparing the appliance
Press the release button and raise the
1.
swivel arm until it engages.
→ Fig.
5
Place the bowl in the main unit.
2.
→ Fig.
6
Use the recesses on the main unit.
Turn the bowl anticlockwise until it en-
3.
gages.
→ Fig.
7
Press the tool into the main drive until it
4.
engages.
→ Fig.
8
To insert the kneading hook:
5.
Insert the kneading hook with the pro-
‒
tective cap fitted in the main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
9
The protective cap
main drive completely.
Add the ingredients to the bowl.
6.
→ Fig.
10
Press the release button and push the
7.
swivel arm down but not fully down.
→ Fig.
11
Hold the swivel arm in a slightly open po-
sition.
Lift the lid slightly at the front, slide fully
8.
onto the bowl and set down.
→ Fig.
12
Push the swivel arm down until it en-
9.
gages.
→ Fig.
13
Processing ingredients with tools
Insert mains plug.
1.
Set the rotary switch to the required
2.
speed.
→ Fig.
14
must cover the
To process the ingredients at maximum
3.
speed for a short time, set the rotary
switch to
and hold for the desired pro-
cessing time.
→ Fig.
15
If wished, further ingredients can be ad-
4.
ded during processing using the filling
shaft.
→ Fig.
16
To add greater quantities of ingredients:
5.
Turn the rotary switch to
‒
wait for the appliance to come to a
standstill.
Lift the swivel arm slightly and pull out
‒
the lid.
Add the ingredients to the bowl.
‒
Fit the lid and push the swivel arm
‒
down until it engages.
Process the ingredients until you achieve
6.
the required result.
Set the rotary switch to
7.
→ Fig.
17
Wait until the appliance stops.
a Processing stops and the drives move to
the parked position.
Finishing processing
→ Fig.
-
18
22
Using accessory drives
Notes
¡ Remove the cover to use accessories on
drive 2 or 3.
¡ Always close unused drives with the pro-
tective covers.
¡ Please follow the instructions for the ac-
cessory.
→ Fig.
-
23
26
cleaning
of
Overview
Overview of cleaning
cleaning
of
Overview
Clean all parts immediately after use so that
residues do not dry on.
▶ Do not use cleaning agents containing
alcohol or spirits.
▶ Do not use sharp, pointed or metal ob-
jects.
▶ Do not use abrasive cloths or cleaning
agents.
Overview of cleaning en
.
and
23
Publicité
