Publicité
Les langues disponibles
Les langues disponibles
Problem
Error LED flashes red
The product does not start
Error LED is lit with red light
Battery
Problem
Green LED flashes.
Red error LED flashes.
Red error LED comes on.
Battery charger
Problem
Red error LED flashes.
Red error LED comes on.
Transportation and storage
•
The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
•
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
•
Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
16
Possible faults
Overload.
Temperature deviation.
The power trigger and the acti-
vate button are pressed at the
same time.
Dirt in the battery connectors.
The product needs servicing.
Possible faults
Low battery voltage.
The battery is empty.
Temperature deviation.
Overvoltage.
Cell difference is to much (1V).
Possible faults
Temperature deviation.
Transportation, storage and disposal
Possible action
The cutting attachment is jammed. Stop the
product. Remove the battery. Clean the cut-
ting attachment from unwanted materials.
Let the product cool down.
Release the power trigger and the product is
active.
Clean the battery connectors with com-
pressed air or a soft brush.
Contact your servicing agent.
Possible solution
Charge the battery.
Charge the battery.
Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Remove the battery from the battery charger.
Speak to your servicing dealer.
Possible solution
Use the battery charger in tempera-
tures between 5 °C (41 °F) and 40 °C
(104 °F).
Speak to your servicing dealer.
•
Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
•
Remove the battery for storage or transportation.
•
Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
•
Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
2129 - 005 -
Publicité
