Signature SHD60PERI/3 Manuel D'utilisation page 31

4. According to the suggested install height
of cooker hood, drill 8 holes for installing
the cooker hood. A is for fixing the Plate II
and the inner chimney. B is for fixing the
Plate I and the inner and outer chimneys
on the wall.C is for hanging the cooker
hood on the wall.D is the safety locks which
are used to fix the cooker hood more safely.
Use 2 screws (4*40mm) and wall plugs
provided to hang the cooker hood on the
Position C. See pic .2.
5. Attach the exhaust pipe on the way wall
valve as shown below. Fix the exhaust pipe
on the valve by cable tie. Two side of the
extensible pipe is different; one side of it is
with "Φ153mm"marking, connect it to the
valve. See pic .3 ,pic.4.
6. Put the inner chimney on the outer chimney.
Install plateⅠ on the outer chimney by two
screws (4mm x 8mm). Drill holes on the wall
for fixing plate I. See pic.5.
- 30 -