Signature SHD60PERI/3 Manuel D'utilisation page 34

● The angle of the bend of the ventilation
pipe should not be less than 120º; you must
direct the pipe horizontally, or, alternatively,
the pipe should go up from the initial point
and should be led to an outer wall.
● After the installation, make sure that the
cooker hood is level to avoid grease
collection at on end. See Pic. 9
● For safety reason, please use only the same
size of fixing or mounting screw which are
recommended in this instruction manual.
● Warning: Failure to install the screws or
fixing device in accordance with these
instructions may result in electrical hazards.
Pic. 9
- 33 -