BRAND PLT Mode D'emploi page 71

7.3 Inspection date
The date on when the PLT unit should be sent to BRAND or an authorized repair shop for testing can
be set individually. This date is displayed each time the unit is switched on.
What to do How to do it
1. Select "Settings" Press the select knob to call
on the Main Menu up the Main Menu.
2. Confirm the set- Press the "Execute" button.
tings The "Settings" submenu is
called up.
3. Select the in- Turn the select knob to the
spection date "Inspection Date" setting.
4. Call up the in- Press the "Execute" button.
spection date The previously set inspection
date is displayed.
5. Set the inspec- Press the select knob to
tion date switch between year, month,
and day. The selected posi-
tion is shown with a frame
around it.
(To go back to the "Settings"
menu, press the select knob
with the "Day" position se-
lected.)
Turn the select knob to
change the value of the se-
lected parameter.
6. Confirm the in- Press the "Execute" button.
spection date The display returns automati-
cally to the "Settings" menu.
PLT unit 997960
Button to use
7 Make settings
Display
Main Menu
Pipette Type
Self Test
Switch OFF
Settings . . .
select
back
Settings
Language
Contrast
Inspection date
Auto-Power-Off Time
select back
Settings
Language
Contrast
Inspection date
Auto-Power-Off Time
select
back
Inspection date
23 January 2023
o.k. back
Inspection date
23. January 2023
o.k.
back
Settings
Language
Contrast
Inspection date
Auto-Power-Off Time
select
back
Operating manual
71