Télécharger Imprimer la page

Parkside PDB 100 A1 Traduction Des Instructions D'origine page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
• Only use tools suitable for turning.
• Never stand in the flight path of the
workpiece.
• Before beginning your work, make sure
the mains plug is unplugged then check
the following by turning manually:
- Is the workpiece fixed?
- Does the workpiece come into contact
with the tool table?
• Always begin with a low speed, incre-
asing gradually.
• Do not introduce the tool to the workpi-
ece until it has reached the set speed.
Remove blockages
Switch off the device and unplug the
mains plug.
Clean any dust and chips from the device
to remove any blockages.
Cleaning/maintenance
Have any work that is not
described in these instructions
performed by an authorised
customer service centre. Only
use original parts.
Before any maintenance or
cleaning work, turn off the ma-
chine, unplug the mains plug
and wait for the workpiece to
come to a standstill. There is a
risk of personal injury
General cleaning and
maintenance work
Never spray down the device
with water. There is a risk of
electric shock.
Always keep the device clean. Use a
brush or cloth for cleaning, but do not
use any cleaning agents or solvents.
Check the covers and protective de-
vices for damage and correct fit. Re-
place these if necessary.
Every 10 hours of operation, check the
V-belt for wear or any damage.
Storage
Store the device in a dry and dustproof lo-
cation and out of reach of children.
Transport
Switch off the device and unplug the
mains plug. There is a risk of injury.
Caution! Hot surface. There is
a risk of burns. Only transport
the machine when the motor
unit (
23) has cooled down
completely.
If possible, carry the lathe together with
another person.
When transporting the lathe, grab it at the
external feet (
7), the rail with motor
unit (
3.1) and the rail (
Disposal /
Environmental
protection
The device, accessories and packaging
should be properly recycled.
Electrical devices must not be dispo-
sed of with domestic waste.
Take the device to a recycling plant.
The plastic and metal parts used on
your device can be properly sorted
GB
IE
3.2).
25

Publicité

loading

Ce manuel est également adapté pour:

339397 1910