Parkside PDB 100 A1 Traduction Des Instructions D'origine page 17

Content
Introduction ............................... 17
Proper use ................................. 17
General description .................... 18
Scope of delivery ............................ 18
Overview ....................................... 18
Description of functions .................... 18
Technical data ............................ 18
Safety information ..................... 19
Graphical symbols .......................... 19
Safe working .................................. 20
Safety instructions for working with
the lathe ........................................ 21
Assembly instructions ................. 21
Assembling the lathe ....................... 21
Setting up the lathe ......................... 22
Installing/changing the workpiece
mounts ........................................... 22
Operation .................................. 22
Selecting the speed ......................... 22
Securing the workpiece .................... 23
Adjusting the tool table .................... 24
Switching on/off ............................. 24
Working instructions .................. 24
Remove blockages .......................... 25
Cleaning/maintenance ............... 25
General cleaning and maintenance
work .............................................. 25
Storage ...................................... 25
Transport ................................... 25
Disposal / Environmental
protection .................................. 25
Spare parts/accessories ............. 26
Troubleshooting ......................... 26
Guarantee ................................. 27
Repair Service ............................ 28
Service-Center ............................ 28
Importer .................................... 28
Translation of the original EC
declaration of conformity ........... 99
Exploded Drawing ................... 105
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use and
disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Proper use
The lathe is intended for processing wood
using a suitable turning tool.
Any other use not expressly approved in
the present instruction manual can damage
the device and thus present a substantial
risk for the user.
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use. The warranty is void in
the case of commercial use.
The device is intended for use by adults.
Children and people who are not familiar
with these instructions must not use the
device. The use of the device in the rain or
a damp environment is prohibited. The ma-
nufacturer is not liable for damage caused
by improper use or incorrect operation.
GB IE
17