Rothenberger ROCAL 20 Instructions D'utilisation page 18

4) To change the value of "OPERATE HOURS" follow the above mentioned instructions of sec-
tions 2 and 3.
5) During automatic functioning, press the keys SX or DX twice in succession to proceed to
manual mode.
6) Once the time set on the display "OPERATE HOURS" is ended, the pump will stop working
and the display will start flashing and show the value 0.
7) To restart the pump press DX or SX; the pump will start working in manual mode and the
value 1 will be seen on the display "OPERATE HOURS".
4 Care and Maintenance
If the mains connection cable of this tool is damaged, in order to prevent endangering personnel
and property it must be replaced by the manufacturer, or the Customer Service of the manufac-
turer, or a similarly qualified person.
5 Accessories
You can find suitable accessories in the main catalog or at www.rothenberger.com
6 Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: ℡ + 49 (0) 61 95/ 800 8200
www.rothenberger.com
7 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EU the disposal of electrical and electronic equipment and its imple-
mentation as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
16
+ 49 (0) 61 95/ 800 7491  service@rothenberger.com -
ENGLISH