Publicité
Les langues disponibles
Les langues disponibles
1
Safety Notes
1.1
Intended use
Hot water cylinders, boilers, heat exchangers, etc..
1.2
General safety instructions
ATTENTION! When using electric tools, the following fundamental safety measures
must be taken to prevent electric shock, injury or fire.
Read all of these instructions before you use the electric tool, and store the safety in-
structions properly.
Service and maintenance:
1
Have your device repaired only by qualified experts and only with original replace-
ment parts. This ensures the continued safety of the device.
Working safely:
1 Keep your work area orderly. A messy work area can
cause accidents.
2 Consider environmental influences. Do not expose electric
tools to rain. Do not use electric tools in damp or wet envi-
ronments. Keep the work area well lit. Do not use electric
tools where there is a risk of fire or explosion.
3 Protect yourself from electric shock. Avoid physical con-
tact with earthed parts (such as pipes, radiators, electric
stoves or cooling devices).
4 Keep other people away. Do not let other people — espe-
cially children — touch the electric tool or its cable. Keep
them away from the work area.
5 Store electric tools safely when they are not in use. Un-
used electric tools should be kept in a dry, high or closed ar-
ea, out of reach of children.
6 Do not overload your electric tool. Work is better and safer
within the performance range indicated.
7 Use the right electric tool. Don't use low-performance ma-
chines for heavy-duty jobs. Do not use the electric tool for
purposes for which it was not intended. For example, do not
use a portable circular saw for cutting tree branches or logs.
8 Wear proper clothing. Do not wear loose clothing or jewel-
lery, as they can get caught in moving parts. When working
outdoors, wear slip-resistant shoes. Wear a hairnet over long
hair.
9 Use protective gear. Wear safety glasses. Wear a breathing
mask during work that creates dust.
ENGLISH
11
Publicité
