SOUNDMASTER URD470SW Mode D'emploi page 22

All manuals and user guides at all-guides.com
LISTENING TO FM RADIO
This unit can also receive FM band radio stations and display RDS data (where
broadcast).
To change to the FM band
· Press the FUNCTION button to select FM.
Tune to FM stations
· Press the SCAN button to search for the next station in the
band.
or
· Press and hold the TUNE UP/DN button for auto search the next station.
· Press the TUNE UP/DN button for manual tune.
The radio will search and the tuning frequency will be displayed whilst
searching.
When a usable station is detected the radio will stop tuning and play the station.
If RDS data is present, the station name and scrolling radio text will be displayed.
If RDS data is not present, the tuned frequency will be displayed.
FM DISPLAY MODE OPTIONS
The bottom line of the display can be switched to show different items of information that
may be transmitted with a FM station.
Choosing the information
display:
Press the INFO button on the front panel repeatedly to change the information
displayed while playing a FM radio station.
The full range of display options are shown below. Some stations may not broadcast
all of these options.
Audio mode (Stereo/ Mono)> Radio Text > Program Type >
Time/ Date > Frequency
FM MONO/ STEREO/ AUTO OPTIONS
AUDIO SET TINGS: This option enables you to set the radio
to receive FM in Auto mode (Mono/Stereo) or in Mono only.
This may be useful if the signal is weak and the broadcast is
noisy
During FM mode,
Press the SELECT button
AUTO: receive the FM STEREO automatically if available.
MONO: receive the FM station in MONO only.
repeatedly to set Audio mode in
Signal Strength >
AUTO MONO
or .