Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
INTIAL SCAN
When this unit is switched on for the first time at TUNER mode, then press FUNCTION
button switching to
DAB
takes place:
The radio scans all usable stations (full scan) and stores them alphanumerically -1
Radio, 2
Radio, AA Radio, AB Radio...The initial scan will take a few minutes. After the scan, the
clock
will be set and the radio will play the name of the first station in the sequence. To browse
for
another station, refer to the next section.
BROWSING FOR A STATION
To browse for another DAB station from the top panel controls:
· Press the TUNE UP/ TUNE DN button.
<Station list> will be displayed.
ADJUSTING THE VOLUME
To adjust the volume from the top panel controls:
Press the VOLUME +/- button to increase or decrease the volume level.
CLOCK SET
SET TIME/DATE: This main option enables the clock to be set manually if these is no
available DAB transmission.
To set the time and data manually:
• When unit during Standby mode, press MENU button to enter Set Clock.
• Set the clock mode 12/ 24 Hour, press the TUNE UP/DN button to choose 12 or 24 time
format then press SELECT button again to next setting.
• Set Hour, press the TUNE UP/DN button to set the hour, then press SELECT button to
confirm.
• Set Min, press the TUNE UP/DN button to set the minute, then press SELECT button
again to confirm.
, the scanning display will be shown while the scanning process
Publicité
