SOUNDMASTER URD470SW Mode D'emploi page 20

All manuals and user guides at all-guides.com
SELEC TING A SOURCE
SOUND SOURCES
· Press the FUNCTION button repeatedly to desired function.
You can choose to listen to following
sources-
· DAB
· FM
· CD/ MP3 playback
· USB MP3 playback
· Aux source (when connected via the AUX jack on the top of unit.)
DAB SCANNING
RE-SCANNING FOR DAB STATIONS
When first used, your radio scanned the DAB band for available stations. The station
services found were then stored in your system's memory.
You can re -scan the band at any time if you move to a different area or just to refresh the
stored list of available stations.
FULL SCAN: Press SCAN button to enable Auto scan
MANUAL TUNING: Press and Hold the SELECT button in few second until display show
"Manual tuning", then press TUNE UP/DN button enables you to search the band manually,
stepping through the ensemble numbers to check if any have usable signal strength.
Press SELECT button again to confirm.
Manual tuning is not necessary in normal operation where scanning will have
automatically established a station list of all useable stations.
DAB DISPLAY MODES
DISPLAY MODE OPTIONS
The bottom line of the display can be switched to show different items of information that
may be transmitted with a DAB station.
Choosing the information
display:
Press the INFO button on the top panel repeatedly to change the information
displayed while playing a DAB radio station.
The full range of display options are shown below. Some stations may not broadcast
all of these options.
DLS Scrolling Text > Program Type > Ensemble name> Ensemble Frequency
Audio Bit Rate> Signal Strength > Time/ Date
DLS (Dynamic Label Segment): This is a scrolling message giving real-time information-
song titles, news headlines, etc.
PROGRAMME TYPE: This describes the style of the program being
broadcast.
ENSEMBLE NAME: DAB Digital radio stations are broadcast in multiplexes. Each
multiplex is a bundle of radio stations transmitted in a signal frequency. There are
>