Electrolux IK1910SZR Notice D'utilisation page 60

3.2 Switching on/off
Switching on
1. Connect the mains plug to the power
socket.
2. Press ON/OFF if the display is off. The
temperature indicators show the set
default temperature.
If "dEMo" appears on the display, refer to
"Troubleshooting" .
Switching off
1. Press ON/OFF for 3 sec.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.3 Temperature regulation
Press the temperature regulators to set the
temperature of the appliance.
The temperature range may vary between
2°C and 8°C for fridge (recommended 4°C).
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 h.
After a power failure the set temperature
remains stored.
3.4 FastCool function
FastCool function allows to chill large amount
of warm food rapidly to avoid warming food
already stored in the fridge.
1. Press the Mode until the corresponding
icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator appears. When the
FastCool function is on, the fan may work
automatically.
This function stops automatically after
approx. 6 hour.
To deactivate the function before it
automatically ends, repeat the procedure or
select a different fridge set temperature.
60 ENGLISH
3.5 NaturaFresh compartment
setting
NaturaFresh compartment provides optimal
conditions for the storage of fresh food due to
high humidity level.
1. Press Mode until the corresponding icon
appears.
The display shows 3. This is the default
setting that ensures the most effective
performance.
Setting 1 is the coldest and 5 is the warmest.
Settings from 1 to3 are suitable for fish and
meat.
Settings 4 and 5 are suitable for vegetables
and fruits.
2. Press the temperature buttons to select
the required setting.
3. Press OK to confirm the setting.
The indicator returns to the fridge
temperature setting after a few seconds.
3.6 FastFreeze function
The FastFreeze function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and protects foodstuffs
already stored from warming.
To freeze fresh food activate the function
at least 24 h before placing the food to
complete pre-freezing.
1. Press Mode button until the FastFreeze
indicator blinks to activate this function.
2. Press the OK button to confirm.
The FastFreeze indicator lights up.
This function stops automatically after 52 h.
Repeat the procedure or select different
temperature to deactivate the function.
3.7 ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.