Ferroli DIVATOP D F Serie Instructions D'utilisation, D'installation Et D'entretien page 71

DIVATOP D F
Index Description
Anti-inertia function Post-Circulation
(b02=1)
DHW Post-Circulation (b02=2)
P11
DHW Post-Circulation (b02=3)
DHW Post-Circulation (b02=4)
P12 Max. output in DHW
P13 Absolute min. output
P14 Post-Ventilation
CO2 limit Offset (b03=0)
No effect on adjustment (b03=1)
No effect on adjustment (b03=2)
P15
CO2 limit Offset (b03=3)
CO2 limit Offset (b03=4)
No effect on adjustment (b03=5)
P16 Exchanger protection intervention
Modulating pump max. speed - absolute
P17
Modulating pump max. speed - post circu-
P18
lation
Solar deactivation temperature (b02=1)
Solar deactivation temperature (b02=2)
P19
No effect on adjustment (b02=3)
No effect on adjustment (b02=4)
Solar ignition temperature (b02=1)
Solar ignition temperature (b02=2)
P20
No effect on adjustment (b02=3)
No effect on adjustment (b02=4)
Solar standby time (b02=1)
Solar standby time (b02=2)
P21
No effect on adjustment (b02=3)
No effect on adjustment (b02=4)
P22 Not used
P23 Not used
Notes:
1. Parameters with more than one description vary their function and/or range in relation to the setting of the parameter
given in brackets.
2. Parameters with more than one description are reset to the default value if the parameter given in brackets is mo-
dified.
To exit the configuration menu press the button
EN
Range
0-10 Seconds
0-60 Seconds
0-60 Seconds
0-60 Seconds
0-100%
0-100%
0=Default
1=50 seconds
0 (Minimum)
30 (Maximum)
--
--
0 (Minimum)
30 (Maximum)
0 (Minimum)
30 (Maximum)
--
0=No F43
1-15=1-15°C/second
Operating at 100%.
Adjustable with optional cable.
0-100% not operating.
Always at 100% in this model
0÷20°C
0÷20°C
--
--
0÷20°C
0÷20°C
--
--
0-20 seconds
0-20 seconds
--
--
or exiting occurs automatically after 15 minutes.
cod. 3542B970 - Rev. 05 - 07/2024
Default
30
100
0
0
20
10
100
60
10
10
10
71