Ferroli DIVATOP D F Serie Instructions D'utilisation, D'installation Et D'entretien page 47

DIVATOP D F
Indication during operation
Heating
A heating request (generated by the Room Thermos-
tat or Remote Timer Control) is indicated by the flas-
hing radiator symbol.
When the burner is lit, the flame symbol appears and
the 3 levels indicate the actual intensity.
bar
29
27
Comfort
In Comfort mode (restoration of boiler internal temperature) the flame symbol appears while the faucet flashes.
Frost protection
In frost protection mode (flow temperature below 5°C) the flame symbol appears.
Fault
In case of a fault, the display shows the fault code with different graphics depending on the type.
A-type fault (fig. 5): To unlock the boiler in the presence of this type of fault, press the button
"Confirm?" appears. Then confirm with the button
F-type fault (fig. 4): A fault which will be automatically reset after the problem has been eliminated.
F10
EN
°C
°C
fig. 2
fig. 4
cod. 3542B970 - Rev. 05 - 07/2024
DHW (domestic hot water)
A DHW request (generated by hot water draw-off) is
indicated by the flashing faucet icon.
When the burner is lit, the flame symbol appears and
the 3 levels indicate the actual intensity.
29
27
.
A01
bar
°C
°C
fig. 3
until the message
fig. 5
47