Publicité
Cleaning
− If necessary, wipe the base station and sensors with a
slightly damp cloth.
Fault/Remedy
Fault
Temperature
indication for the
outdoor sensor
appears too high.
The display shows
"H.HH" or "LL.L"
instead of the
measured values.
Display is illegible,
function is unclear or
values are obviously
incorrect.
Pool Thermometer WS2331
Possible Cause
‚ Check whether the sensor
is exposed to direct
sunlight.
‚ The values lie above or
below the display range.
Reset the pool thermometer to
its default settings.
1. Remove the batteries
from the pool sensor, the
wireless outdoor sensor
and the base station.
2. Wait a moment.
3. Proceed as described in
"Start-up".
39
Publicité
