Publicité
− Set up the base station as close to a window as
possible. Here, the reception will generally be best.
Setting up the outdoor sensor
DANGER of severe injuries
− During wall installation, there must be
The wireless outdoor sensor is equipped with a hanging
eyelet on the rear side.
− Place or hang the wireless outdoor sensor in a
location where it is protected from direct effects of
the weather (rain, sun, wind, etc.).
Suitable locations are, for example, under an awning
or in a carport.
Functions
Displaying stored temperatures
As soon as the temperature and humidity values are
displayed, the base station starts recording the maximum
and minimum temperature values.
1. Press the MEM button repeatedly to display the
following values in sequence:
− highest pool and outside temperature (MAX)
− lowest pool and outside temperature (MIN)
− current pool and outside temperature
Pool Thermometer WS2331
no electrical cables, gas or water pipes
installed in the walls at the mounting site.
Otherwise, when drilling holes, there is a
risk of electric shock!
37
Publicité
