Publicité
Checklist when data is missing on the
display
No data display from the pool sensor or the wireless
outdoor sensor
1.
2.
Setting the time and date manually
1. Press the
and 24-hour formats.
2. Press and hold the
the display.
c
3. Use the or buttons to set the hour.
4. Press the
5
move on to setting the minutes.
5. Then press the or button to set the required
c
value.
6. Finish by pressing the
6
Pool Thermometer WS2331
Check that the batteries are inserted the right way
round.
Check whether the location is suitable, see
"Choosing a location".
If there is more than approx. 20 seconds
between two pushes of a button, the setting
process automatically ends and you will have to
repeat it.
button to toggle between the 12-hour
button to save the hour setting and
MEM
button until the hour flashes on
MEM
MEM
button.
MEM
35
Publicité
