Publicité
Starting signal reception
As soon as the base station is supplied with current, all
of the indicators on the display will fade in for a brief
moment. The display will also light up briefly.
The device then switches to receiving mode,
during which the number of radio waves
indicates the quality of the reception: The more
radio waves shown on the display, the better is
the reception.
‚ Temperature data received by the wireless outdoor
sensor and the pool sensor will appear on the display
after a short time. From now on, this data will be
transmitted several times a minute and constantly
updated.
If no sufficiently strong signal has been received,
the base station aborts the receiving process after a few
minutes and the radio-tower symbol goes out.
Starting signal reception manually
Use the button to select the area that you want to
connect to (pool temperature or outside temperature).
Press the button again and hold for longer than
2 seconds to start receiving data again.
34
c
5
c
6
Pool Thermometer WS2331
Publicité
