Fein ASCD18-200W4 AS Mode D'emploi page 23

Illumination (figure 10).
Never look or stare into the
WARNING
light of the power tool's lamp
from a short distance. Never point the light
of the lamp into the eyes of other persons in
close vicinity. The radiation produced by the
lamp can be harmful for the eye.
When pressing the On/Off switch, the light
is switched on.
After releasing the On/Off switch, the light
briefly stays on and then switches off auto-
matically.
Securing cable (figure 11).
For working aloft, FEIN offers suitable
securing cables for the product as accesso-
ries.
Do not exceed the maximum
WARNING
load specified on the secur-
ing cable. Otherwise, serious or fatal inju-
ries may result.
Observe the safety and operating instruc-
tions enclosed with the securing cable.
Connect the securing cable to the intended
fastening point of the power tool only as
shown.
Fig. 10
10 s
Fig. 11
3.
en
=
=
2.
1.
23