Motorola Vigilant CarDetector Mobile 6.5 Mode D'emploi page 48

MN010363A01-AA
Chapter 2: CarDetector Mobile Configuration and Use
Figure 45: Advanced Proxy Settings
NOTE: Contact your local IT Department if you are having problems connecting to the internet.
2.4.1.8
Configuring More Settings
The More tab is used to enable miscellaneous optional settings.
Procedure:
1. To enable the receipt of TAS alerts local to this CarDetector Mobile system, select the Enable TASC
service check box.
2. Select the desired device to receive GPS data from: a connected VLP, M500, or allow CarDetector
Mobile to choose.
3. To automatically start CarDetector Mobile when Windows boots, select the Auto start up CDM with
Windows check box.
NOTE: This option is useful if the computer that CarDetector Mobile is running on is expected to
restart frequently.
48