Motorola Vigilant CarDetector Mobile 6.5 Mode D'emploi page 40

MN010363A01-AA
Chapter 2: CarDetector Mobile Configuration and Use
Number
1
2
3
4
5
6
7
8
9
2. In the Device drop-down menu, select the device to be displayed or enter the <IP address> of a
VLP or M500 to add.
3. To verify that the device is powered on and connected, select the Test Connection button.
4. Select the Refresh button check for any recently connected cameras.
A success message appears when the cameras are successfully connected.
5. Select the check box next to the camera that you want to activate.
6. To view or set the connected device, name, or index of the camera, select Camera Info.
7. Perform one of the following actions:
● To save the configuration, select Apply.
● To discard any changes and close the Setup window, select Close.
2.4.1.2
Configuring Camera Settings for CDMP (RHD as IP)
Procedure:
1. To set up camera connections, click Setup in the Control Menu.
40
Description
Camera Tab
Camera List
Activate Camera Check Box
Camera Slot/Name/Connected Device
Device Selection/IP Address
Test Connection
Refresh Camera List
View Camera Info
Apply Changes/Discard and Close