Publicité
Les langues disponibles
Les langues disponibles
MN010363A01-AA
Chapter 2: CarDetector Mobile Configuration and Use
One-off match + Plate 1 only
Make an alarm sound when any detected plate number on Plate 1, which has only one-character
difference from one of those of any plate number in the hot list (including the case of a plate with less or
more than one character).
One-off match + Plate 1 & Plate 2
Make an alarm sound when any detected plate number on Plate 1 and Plate 2, which has only one-
character difference from one of those of any plate number in the hot list (including the case of a plate
with less or more than one character).
2.4.1.6
Configuring Clean Settings
The Clean tab configures when older detections in CarDetector Mobile's database.
Procedure:
1. Configure database cleanup within the Mobile LPR application's database of detections.
2. Indicate the cleanup cycle and click Apply to save your preferences.
Figure 43: Clean Tab
Delete local LPR data older than [X] days
Check to enable Archive Maintenance. Specify the maximum number of days for the archive to hold
detections. All data older than the selected number of days will be deleted.
NOTE: Detection records remain in Vigilant PlateSearch after local data is deleted.
2.4.1.7
Configuring Proxy Settings
Proxy settings are only needed if CarDetctor Mobile is using an internet connection requires it. For normal
operation, the default selections can be used.
46
Publicité
