Dal Zotto WANNA IDRO Manuel Utilisateur page 54

KEY LOCK
The menu allows the user to lock the display keys (like with mobile phones).
CONTROLS PROCEDURE
Š Press key 6.
Š Proceed by pressing key 2 until SETTINGS IS DISPLAYED.
Š Con rm using key 6.
Š Press key 2 until DISPLAY is shown.
Š Con rm using key 6.
Š KEY LOCK will appear - con rm with key 6.
Š Use keys 4 -5 to enable ON/ disable OFF.
Š Press key 1 several times to con rm and exit the menu.
USING THE KEY LOCK AFTER ACTIVATION:
TO LOCK THE KEYBOARD, PRESS KEYS 1 AND 5 AT THE SAME TIME UNTIL THE FOLLOWING APPEARS: "KEYS
LOCKED"
TO UNLOCK THE KEYBOARD, PRESS KEYS 1 AND 5 AT THE SAME TIME UNTIL THE FOLLOWING APPEARS: "KEYS
UNLOCKED"
BRIGHTNESS
This menu allows the user to adjust the brightness of the display. The possible settings range from OFF - 10 to 31.
Activating OFF, the back light of the display will go o after a preset delay.
The back light will go on as soon as a key is pressed or if an alarm should be triggered in the machine.
CONTROLS PROCEDURE
Š Press key 6.
Š Proceed by pressing key 2 until SETTINGS IS DISPLAYED.
Š Con rm using key 6.
Š Press key 2 until DISPLAY is shown and use key 6 to con rm.
Š Press key 2 until BRIGHTNESS appears and con rm with key 6.
Š Use keys 4 - 5 to set the brightness.
Š Press key 1 several times to con rm and exit the menu.
STAND BY
The Stby function is used if immediate stove switch-o or modulation via an additional thermostat is desired.
CONTROLS PROCEDURE
Š Press key 6 and SET POWER will appear.
Š Press key 2 several times until SETTINGS is displayed.
Š Press key 6.
Š Press key 2 until STAND BY is displayed and use key 6 to con rm.
Š Use keys 4 -5 to select enable ''ON''/disable ''OFF'' .
Š Press key 1 several times to con rm and exit the menu.
AUX
If using powerline accessories of the manufacturer, the connection must be carried out by the technician enabled directly in the board.
Contact the dealer for further details.
54 ENGLISH
OFF
OFF