Publicité
Les langues disponibles
Les langues disponibles
CLEAN AND INSTALLING HARNESS BUCKLE
WARNING
• Tug hard crotch strap to make sure the metal plate is well secured in the seat shell.
Rotate the metal plate on crotch straps by 90° vertically. Slide the metal plate through the
harness slot in the way (B) lies in horizontal position, then harness buckle (7) can take out
from slot (A). To re-install harness buckle, follow the steps below, until the metal plate is
hooked into the harness slot. Thread the buckle through the crotch pad (8) on the cover.
Make sure the metal plate under slot (C) when you are using.
Harness buckle
To ensure the safety of your child, it is essential that the harness buckle continues to function
correctly. Harness buckle malfunctions are usually caused by a build-up of soiling or external
objects.
• When you press the red release button, it takes a long time for the buckle tongues (15) to
be ejected.
• The buckle tongues (15) no longer engage (i.e., when you try to push them in, they pop out
again)
• The buckle tongues (15) engage without a clicking sound.
• The buckle tongues (15) are difficult to push in (you feel a certain amount of resistance).
• The harness buckle (7) only opens if extreme force is applied.
Remedy: Soak the harness buckle in warm water containing washing-up liquid for at least an
hour. Rinse the buckle thoroughly and dry it.
C
B
A
C
B
A
EN
55
Publicité
