Important Components - EUROM Spirit 1500 Manuel D'utilisation

Important components

1. electrical cable
2. hanging chain
3. hanging eye for heater
4. screw locking
5. control box
6. rotective cover
7. reflective screen
8. carbon lamp
9. grille
Installation
Mounting hardware included:
- Two suspension brackets with screw eye + nut and 4 screws
- Key-bolt with hanging eye
- Standard attachment chain (50 cm) with screw locking and ring
- Additional security chain (30 cm)
- 2 Karabiner hooks
- 3 Tie wraps
Screw both suspension brackets with the
screw eye and the nut perpendicularly to
each other. Screw the whole with the 4
screws to the appliance, see picture.
The device must be hung so that there is 50
cm of free space between the control box
and any ceiling, tent canvas etc. The
hanging chain measures 50 cm.
Additionally, at least 50 cm of space must
be left at the sides, between the device and
any side walls, tent canvas and other
objects. There must also be at least 1.80 m between the ground and the underside
of the device. The device can never be hung on a hook in the wall as it could hang
at a slant!
There are two methods of hanging:
1. On the ceiling
2. On a frame (e.g. a tent frame)
23