Reflex Hydroflow-S Instructions De Montage Et D'utilisation page 20

908.19.52.31
Last updated 2023/11/02
Suspend and align the station [15] and
fasten on the hanger bolts [4] using lock
nuts
Use the blind rivet nuts [9] on the bottom
hanger bolt [8] to align the station
perpendicular to the wall.
Mount the transition nipples [14] at the top
and bottom of the station.
The angle ball valves [1] are mounted on
the transition nipples [14]
The distribution valve [10] is mounted on
the hot water connection. The servo-motor
[11] is mounted on the distribution valve
[10]
The heating flow pipe [16] is attached to
the upper angle ball valves [1].
The heating return pipe [13] is attached to
the bottom angle ball valves
The cold water pipe [12] is attached to the
cold water inlet on the stations [15]
The hot water pipe [7] is attached to the
distribution valves of the stations
The heating flow pipe [16] and heating
return pipe [13], and the hot [7] and cold
water pipes [12] are identical
- 8 -