Reflex Hydroflow-S Instructions De Montage Et D'utilisation page 19

5 A s s e m b l y a n d i n s t a l l a t i o n
908.19.52.31
Last updated 2023/11/02
Score three holes per station as shown.
Drill 6 holes to a depth of approx. 70 mm
and with a  of 10 mm.
Then insert the plugs 10 mm [5] into the
holes.
Screw in the top two hanger bolts M8x
180 mm [4] of the station in question until
124 mm still protrude
Screw in the top bottom hanger bolts M8x
150 mm [8] of the station in question until
84 mm still protrude
Then fit the washers [3] and the spacer
sleeves [6] on the top hanger bolts [4]
Blind rivet nuts [9] are mounted on the
bottom hanger bolts [8].
- 7 -