Reflex Hydroflow-S Instructions De Montage Et D'utilisation page 15

1 G e n e r a l i n f o r m a t i o n
This manual describes the installation of the cascade pipe system for the Hydroflow- S/M
fresh water module and is only valid in conjunction with the installation and operating manual
for the fresh water module Hydroflow- S/M.
The installation and commissioning procedures should only be conducted by qualified,
specialist personnel.
The fresh water module may only be installed and operated on frost-protected, dry premises.
Read this manual carefully before starting any installation work.
Non-compliance will invalidate all claims under the guarantee and warranty.
Illustrations are symbolic and may differ from product to product.
Subject to technical changes and errors.
1.1 Intended purpose
The cascade pipe system is used for installing the Hydroflow- S/M freshwater module in a
cascade circuit.
1.2 Standards and guidelines
In addition to country-specific directives and local regulations, the rules and standards of the
installation instructions for the Hydroflow- S/M apply.
1.3 Applicable documents
Always follow the installation and operating instructions for the fresh water module.
908.19.52.31
Last updated 2023/11/02 - 3 -