Publicité
Les langues disponibles
Les langues disponibles
The induction hob or a
Technical fault.
cooking zone has
turned itse
lf off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Failure Display and
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem
Possible causes
F3/F
4
Temperature sensor of the
induction coil failure
F9/FA
Temperature sensor of the IGBT
failure.
E1/E2
Abnormal supply voltage
E3
High temperature of the induction
coil temperature sensor
E5
High temperature of the IGBT
temperature sensor
The above are the judgment and inspection of comm
Please
do
not
disassemble
the
unit
to the induction
hob.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the
wall, and contact a
qualified technician.
Inspection
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the pow
supply is normal.
Please contact the supplier.
Please restart after the hob
cools down.
on failures.
by
yourself
to
avoid
any
dangers
and
EN
-
25
Technical
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building
-
in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to
improve our
notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
er
For the purpose of installation and use, a minimum of 5 cm spa
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please
resistant work surface material to avoid larger deformation caused by the heat
radiation from the hotplate. As shown
damages
L(mm)
W(mm
590
520
Specification
CETPS64SCWIFITT/1
4 Zones
220
2.
5kw:2250
3.0 kw:2700
4.5kw:4050
6.5kw:5850
7.4kw:6600
590X520X60
560X490
products we may change specifications and designs without prior
below:
)
H(mm)
D(mm)
A(mm)
60
56
560
+5
EN
-
26
-
240V~, 50
-
60Hz
-
2750W or
-
3300W or
-
4950W
or
-
7150W
or
-
7400W
ce shall be
select heat
-
B(mm)
X(mm)
490
50 mini
+5
Publicité
