Publicité
Les langues disponibles
Les langues disponibles
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will bips for 30 seconds and the timer
indicator shows "- - " when the setting time
finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 1#)
2. Touch timer control, The minder indicator
will start flashing and "00" will show in the
timer display.
3. Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
EN-21
5.
To cancel the timer, touch the heating zone selection co
the
"
" -
of
timer
and
scrolling
down
show in the minute display, and then
6.
When cooking timer expires, the corresponding cooking zone will
automatically switch off and show
Other cooking zone will keep operating if they are turned on
Setting the timer to turn more than one cooking zone
off
1.
If
use
this
function
to
more
than
the shortest
time.
(e.g. zone 1# set
ting time of 2 minutes, zone 2# setting time of 5 minutes,
the timer indicator shows "2".)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other
zone selection control. The timer will indicate its set time.
(set to 5
(set to 2
2.
When cooking timer expires, the corresponding heating zone will
automatically switch off and show
NOTE: If
you want to change the time after the timer is set, you have to start
from step 1
ntrol, and then touch
to
"0",
the
timer
is
cancelled,
and
"
--
".
"H".
one
heating
zone,
the
timer
indicator
heating zone, touch the heating
minutes)
minutes)
"H".
EN
-
22
the
"00"
will
be
previously.
will
show
be
Publicité
