Télécharger Imprimer la page

Linea 2000 Domo DO42327PC Mode D'emploi page 31

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
I CLEANING AND MAINTENANCE
·
To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.
·
Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance
and possibly result in a hazardous situation.
I PRODUCT-SPECIFIC WARNINGS
·
The surfaces of the appliance are likely to get hot during use. It is advised not to touch the surfaces of
the appliance other than the handles to avoid burns.
·
Do not move the appliance while it is still operating.
·
Do not heat the appliance when the tank contains no water.
·
Never move the device while there is water in it or while it is still in use.
·
Do not use the device in places with high humidity or high temperature.
·
The device was designed and built in its entirety. Do not attempt to disassemble or modify it.
·
Never place this device near water. Make sure that the device can never fall into water.
·
Remove all liquid from the device when not in use.
PARTS
1.
Cover
2.
Handle
3.
Openings for installing a tap
4.
Thermostat button (on/off)
5.
LCD display
6.
Time switch
7.
Grate
8.
Tap cover
9.
Tap
7
BEFORE THE FIRST USE
·
Make sure all packaging materials and promotional stickers have been removed before using the
appliance for the first time.
·
Check the device for any transport damage.
·
For hygienic reasons, the device must be boiled before use. Put approximately 6 litres of water in the
pot. Set the thermostat to maximum and turn the timer knob until it is at 60 minutes. After the set
time, the device will automatically turn off. After cooling, the device is ready to use.
·
When using the appliance for the first time there may be a slight smell.
www.domo-elektro.be
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
9
8
3
4
3
5
6
DO42327PC
1
2
31

Publicité

loading