BORETTI CFBI901AN1 Prescriptions De Montage Et Mode D'emploi page 195

ERROR CODES ON THE COOKING ZONES DISPLAY
Error code
Erxx
or Ex (not E2 or
EH)
or
display
not operative
E2
or
EH
E6
or
display
not operative
Symbol
as per
side
figure
Example What to do
Switch off the cooker and disconnect it
1.
from the mains.
2. Wait for about 1 minute, then reconnect
the cooker and turn on the cooking zones.
3. Wait for about 1 minute and if the error
message does not appear again the
cooking zones can be used.
4. If the error message does not disappear
repeat step from 1 to 3.
5. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
E and 2 alternating for one or more cooking
zones.
This indicates an overheating of the cooking
zone/s.
Switch off the cooking zone/s and leave
1.
to cool.
2. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
The cooker has been incorrectly connected.
The appliance shall be connected to the
appropriate power supply by a qualified
technician.
This indicates an incorrect operation of one or
more cooking zone control knob.
1. Turn the cooking zone control knobs to
" (Off) position, then switch off the
O
the "
cooker and disconnect it from the mains.
2. Wait for about 1 minute, then reconnect
the cooker and turn on the cooking zones.
3. Wait for about 1 minute and if the error
message does not appear again the
cooking zones can be used.
4. If the error message does not disappear
repeat step from 1 to 3.
5. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
195 195