Publicité
Les langues disponibles
Les langues disponibles
2
ELECTRICAL SECTION
IMPORTANT: The cooker must be
installed
in
accordance
manufacturer's instructions.
Incorrect
installation,
the
manufacturer
responsibility, may cause damage to
persons, animals and things.
GENERAL
•
Connection to the mains must be
carried out by qualified personnel in
accordance with current regulations.
•
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical
cable sections can withstand the load
specified on the plate.
•
The appliance can be connected
directly to the mains placing an
omnipolar
switch
opening between the contacts of 3 mm
between the appliance and the mains.
•
The power supply cable must not touch
the hot parts and must be positioned
so that it does not exceed 75°C at any
point.
•
Once the appliance has been installed,
the switch or socket must always be
accessible.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
and burning.
If the installation requires alterations to the
domestic electrical system or if the socket
and appliance plug are incompatible, call
an expert.
He should also check that the socket cable
section is suitable for the power absorbed
by the appliance.
with
the
for
which
accepts
no
with
minimum
DO NOT use the hob if the glass surface
is broken or cracked in any way.
Please disconnect the appliance from
the mains and call the After-Sales
Service.
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must be
interrupted.
The connection of the appliance to
earth is mandatory.
The
manufacturer
responsability for any inconvenience
resulting from the inobservance of this
condition.
declines
all
183
183
Publicité
