Parkside Performance PABSP 20 Li C3 Guide De Démarrage Rapide page 31

Wireless data transmission
m WARNING! Radio interference!
Switch the product off on airplanes, in
hospitals, service rooms, or near medical
electronic systems. The wireless signals
transmitted could impact the functionality of
sensitive electronics.
Keep the product at least 20 cm from
pacemakers or implantable cardioverter
defibrillators, as the electromagnetic radiation
may impair the functionality of pace makers.
The radio waves transmitted could cause
interference in hearing aids.
Do not place the product near flammable
gases or potentially explosives areas (e.g.
paint shops) with the wireless components
on, as the radio waves emitted can cause
explosions and fire. The range of the radio
waves varies by environmental conditions.
In the event of wireless data transmission,
unauthorised third parties receiving the data
cannot be excluded.
Operating system updates
In order to keep the product up to date,
it is necessary that you always keep the
operating system of your smartphone and/
or tablet PC up to date.
Update the operating system regularly.
˜ Before first use
˜ Accessories
To operate this product safely and correctly, the following
accessories, i.e. tools and accessory tools, are necessary:
Suitable drill bits
Suitable driver bits
Cooling lubricant (cutting oil) suitable for drilling in metal
Suitable personal protective equipment
Accessories and accessory tools are available through your
authorised dealer. When buying always consider the technical
requirements of this product (see "Technical data").
If you are not certain, ask a qualified specialist and get advice
from your trusted dealer.
NOTE
This instruction manual contains information and
u
suggestions for several accessory tools and their uses.
The accessory tools depicted are not included in the
shipment (see "Scope of delivery"), but are meant to
indicate additional possibilities for using this product.
m
WARNING!
Do not use accessories not recommended by Parkside.
u
This may result in electric shock or fire.
Suitable battery packs and chargers
Battery pack: Parkside X 20 V Team
Charger:
Parkside X 20 V Team
NOTES:
You can operate the product via your home Wi-Fi network
o
or manually without a Wi-Fi network.
The Lidl Home app is required to control and set up the
o
product via your home Wi-Fi network.
The Lidl Home app supports the operating systems iOS
o
9.0, Android 5.0 or higher.
This product is compatible with other products in the Lidl
o
Smart Home range.
˜ Attaching/removing the battery
pack
m
CAUTION! RISK OF INJURY!
Always lock the on/off switch
u
starting by moving the rotation direction switch
the centre position (Lock) before attaching/removing
the battery pack .
[ ]
Removing the battery pack: Press the battery pack
release button . Remove the battery pack
[ ]
Attaching the battery pack: Align the battery
pack to the handle and slide it into it. Ensure it clicks
[ ]
noticeably in place.
The battery pack can only be inserted into the product in
one direction.
NOTE
If the battery pack
u [ ]
the on/off switch is pressed for the first time, the
6 ] [
connection status LED
[
to avoid accidental
6 ] [
into
5 ] [
(Fig. D).
[ ]
is inserted into the product and
flashes 3x.
]
GB/IE 31