Kenwood KRC-3002 Mode D'emploi page 6

Operation
i Tape playback
1. Turn the power ON.
5. To stop playback, press the Eject switch.
@ Tape advance
for playback.
Dolby B type NR system
H Auto tuning (seek)
1. Turn the power ON.
2. Select the desired band.
3. Set the Auto/Manual switch to Auto.
4. When the Tuning knob is twisted, the tuner starts searching for the next listenable station.
@ Manual tuning
. Turn the power ON.
. Select the desired band.
. Set the Auto/Manual switch to Manual.
display shows the frequency of the required station.
BON
gee