Bodet Harmonys Flash Manuel D'installation Et De Mise En Service page 9

4. USE - WEB SERVER
There are two ways of accessing the product web interface:
• Open a page on your web browser, then enter the IP address of the product present on your network in the
search bar (for example: 192.0.1.128).
• Use the Sigma software and access the Configuration menu > IP equipment > Tab "Harmonys Flash"
then click on the button "Web server access" to open the product web server (please refer to the software
manual, 607726).
The SIGMA software can be used to:
- detect equipment present on the network,
- individually configure each equipment or copy the parameters of one device to a group of devices,
- update the software version of the device.
4.1. "Home" menu
The "Home" menu features the following general information:
• Product: Type of product.
• Name: BODET + @MAC. @MAC is the MAC address of the product: it varies from one product to
another and matches the MAC address stated on the identification label of the product during its
installation. The MAC address (name) can be modified in the "Network configuration" menu.
This default value enables to find the product on the network during commissioning.
ENGLISH
9