4.6. "System" menu
The "System" menu provides information on the device, enables to carry out several actions on this device
and modify the credentials for accessing the product web server.
• Firmware:
Version of the programme integrated into the device.
• Uptime :
Period since the product was last switched on.
• Datecode:
Product manufacturing date (year/week).
• Checkbox
Enables / disables authentication when accessing the device web server. If enabled, fill
Authentication:
in the three following fields.
• Username:
Username for accessing the web server (16 characters maximum).
• Password :
Password for accessing the web server.
• Password
Confirming the password.
confirmation :
The "Save" button is used to save your new ID and password.
The "Reboot" button restarts the product.
The "Factory config. + Reboot" button resets the product to factory settings.
This action will erase any settings you have made and may cause the device to lose its connection
to the network if there is no DHCP server.
ENGLISH
15