Bodet Harmonys Flash Manuel D'installation Et De Mise En Service page 7

3.2. Interface
The product features an interface situated on the right-hand side of the product.
Designation
fig. 2
"Test" button
LED " "
LED " "
3.3. Light sequences
Light sequence display on the product:
fig. 3
There are several types of light sequences.
Product programming varies depending on whether or not the user makes certain settings.
See the chapter 4.5 "Flash colors configuration" menu.
The "Alert" and "Loop" modes are selected from the Sigma software.
Melody
"Alert" "Loop"
mode mode
No
No
Yes
No
No
Yes
Status
ON
OFF
Colour
Green
Green
Red
Colour
Duration
selection
10 s
No
Until a
STOP
10 s
Yes
Until a
STOP
Description
Launch of a light sequence to check the
proper functioning of the product (see
next chapter).
Product switched on.
Product switched off.
Flashing
Fast The product is searching for network.
Slow Product connected to the network.
Slow Loss or failure to connect to the
network.
Light sequence
Green flash - White flash - Green flash - White flash.
According to selection:
Green flash - White flash - Green flash - White flash.
or
Red flash - White flash - ...
or
Blue flash - Switched off - ...
ENGLISH
7