Bodet Harmonys Flash Manuel D'installation Et De Mise En Service page 4

ENGLISH
1. GENERAL SAFETY INFORMATION
Read the safety instructions carefully before installing the product.
Observe the safety tips at all times while installing, using and maintaining the product.
1.1. Symbols used
The following icons are used to indicate risks or sources of danger when installing, using and maintaining this
product.
Symbol
IEC60417 - 1641
Operating instructions
IEC60417 - 0434b
Caution
1.2. Installing the product
Installation and maintenance of this product must be carried out by qualified personnel.
The computer network must imperatively be PoE or PoE+ so that the product is powered via an Ethernet
cable.
The installation must comply with the 802.3af standard.
1.3. Product troubleshooting
In case of problems when installing or using the product, we recommend that you read the chapters 2.3
Prerequisites and 6. Self-troubleshooting of this manual before reaching out to BODET technical support.
There are no user-serviceable components in this product.
If necessary, please contact BODET technical support if the product needs troubleshooting.
4
Description
indicates advice, a recommendation or other practical
information.
indicates that special attention needs to be paid.