Publicité
Les langues disponibles
Les langues disponibles
To remove the product from the
package
WARNING:
pallet carefully and safely. The product is
heavy and can cause serious injury if it falls.
•
Make sure that all items that is shown in the product
overview, are included. Refer to
right side PG 6 S on page 3 . Speak to your
Husqvarna dealer if an item is missing or damaged
before you move the product from the pallet.
•
Remove all package straps and wheel chocks.
•
Make sure that the area is clear and that you have
sufficient space to move the product.
•
Make sure that there is no risk that you or the
product can fall.
•
Use lifting equipment or ramps to move the product
from the pallet. The product is heavy. Move the
product safely. Refer to
23 .
To do before you operate the product
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Put on necessary personal protective equipment.
Personal protective equipment on page 9 .
Refer to
3. Make sure that only approved persons are in the
work area.
4. Do daily maintenance. Refer to
schedule on page 19 .
5. Make sure that the product is assembled correctly
and is not damaged.
6. Put the product on the work area. Make sure that the
transportation of the product to and in the work area
is done safely and correctly. Refer to
on page 23 .
7. Make sure that there are diamond tools on the tool
plates and that the diamond tools and tool plates are
tightly attached.
8. Connect a dust extractor to the product. Refer to
connect a dust extractor on page 15 .
9. Adjust the handle and the handlebar to an applicable
operation height. Refer to
the handlebar on page 15 .
10. Make sure that the motor cable is connected to the
electrical enclosure before the product is connected
to a mains outlet. Refer to
grinding head on page 20 .
11. Connect the product to a power source. Refer to
connect the product to a power source on page 16 .
12. Turn the emergency stop button on the control panel
clockwise to make sure that the emergency stop
button is disengaged.
12
Move the product from the
Product overview,
To lift the product on page
Maintenance
Transportation
To adjust the handle and
To install and remove the
13. Make sure that you know the direction of rotation of
the grinding discs when you use direction diamond
tools such as Piranhas.
To engage and disengage the support
frame
The product has a support frame that is used to tilt the
product rearward. Also, the support frame is used as a
suspension device to hang the dust extractor hose and
the power cord on.
WARNING:
the support frame. The moving parts can
cause injury.
1. Lift the support frame (A) a small distance.
2. Lower the support frame (B).
To
3. Fold up the support frame in the opposite sequence.
Diamond tools
There are many different types and configurations of
To
diamond tools for the product. Metal bonded diamond
tools are used for removal of material and resin bonded
diamond tools are used to polish surfaces. Select the
correct diamond tools for the surface. Speak to your
Husqvarna dealer or go to www.husqvarnacp.com for
support to select the correct tool.
Be careful when you move
A
B
2288 - 005 - 24.05.2024
Publicité
