Brevi turbo t180sr Manuel D'utilisation Et D'entretien page 25

4 STARTUP
4.1 BEFORE USE
Before beginning work, make sure that the machine is in order,
that the lubricating oils are at the right level and that all part-
sure that the guards are correctly positioned.
4.1.1 DRIVELINE
When the driveline is fully extended, in all work conditions, the
telescopic tubes must overlap to at least 1/3rd of their length
( Fig. ).
When the driveline is fully inserted, the play must be at least 4
cm (B Fig. ). Contact the Manufacturer's Technical Service if
this is not possible.
-
-
-
4.1.2 WORK POSITION
-
4.2 HITCHING TO THE TRACTOR
-
Proceed in the following way to hitch the machine to the tractor
in the correct way:
tion suits the machine in question.
Make sure that there are no objects, bystanders and/or
animals in the immediate vicinity of the machine and that
the PTO is disengaged.
Make sure that the machine is in a stable, horizontal posi-
tion, then back up the tractor towards the machine.
- 25 -
turbo t 180sr
Fig. 4
CAUTION
-